08/05/18

Agilent 82357b Usb/gpib Driver

Agilent 82357b Usb/gpib Driver Average ratng: 9,8/10 3807votes

Connecting Instruments via GPIB. Choose your country. Utility comes with the NI-488 driver for your GPIB controller. This tutorial uses a USB-GPIB. Yesterday I installed the latest 'Agilent Connection Expert' software and tried to use an Agilent 82357B USB IEEE488/GPIB Adapter. But the USB device driver seems to.

• Agilent 82357B USB/GPIB Interface Quick Start Guide Agilent Technologies. • Notices © Agilent Technologies, Inc. 2006-2012 No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or transla- tion into a foreign language) without prior agreement and written consent from Agi- lent Technologies, Inc.

• Safety Symbols Caution, risk of danger (refer to this manual for specific Warning or Caution information) Regulatory Markings The CE mark is a registered trademark of the European Commu- nity. This CE mark shows that the product complies with all the relevant European Legal Directives.

• Technologies, Inc. Assumes no liability for the customer’s failure to comply with these requirements.

This product is designed for use in compliance with: • IEC 61010-1:2001/EN 61010-1:2001 • USA: UL61010-1:2004 • Canada: CSA C22.2 No. 61010-1:2004 For further information on safety, refer to the 82357B User’s Guide. • Insert the Automation-Ready CD Install the IO Libraries Suite Look for IO icon 3 Connecting the 82357B Plug the 82357B into a USB Port Observe the 82357B LEDs 4 Configuring the 82357B Observe the Agilent Connection Expert Configure the 82357B.

• This quick start guide shows a suggested six-step process to install the 82357B and the Agilent IO Libraries Suite, to connect the 82357B to your PC, to configure the 82357B, and to program GPIB instruments via the 82357B. It also includes the product technical specifications information. • • If you have the Agilent IO Libraries v14.2 installed and NO TE would like to use 82357B USB/GPIB Interface, you will need to install the 82357B driver. You can download the driver from the Technical Support section on the following site: • Run then type:autorun auto.exe, where is your CD drive letter. Install the IO Libraries Suite • See the 82357B User’s Guide for the full IO Libraries Suite NO TE installation procedures.

• You are recommended to install the latest version of IO Libraries Suite. • Agilent IO Libraries. Radiohead The Bends Zip Rar Free. • Disconnect any USB instruments from your PC.

• Disconnect any Agilent 82357B USB/GPIB Interface con- verters from your PC. • Disconnect any Agilent E8491 IEEE 1394 PC Link to VXI interfaces from your PC.

• 3 Connecting the 82357B Plug the 82357B into a USB Port Plug the 82357B USB cable into an available USB port on your PC or on a supported USB hub. To connect to USB hubs, see the 82357B User's Guide. The picture shown below is for illustration purposes only. • Instrument I/O on this PC pane (also called the “Explorer Pane”). At this time, the Connection Expert window should refresh. If it does not refresh automatically, click Refresh All.