04/04/18

Tera Term Serial Macro Examples

Tera Term Serial Macro Examples Average ratng: 5,6/10 6594votes

Connect connect Connects. Connect Remarks If MACRO is not linked to Tera Term, this command runs Tera Term with, and links it to MACRO. If MACRO has already been linked to Tera Term and Tera Term is not connected to the host, this command causes Tera Term to connect to the host specified. See ' and ' for the format of. If MACRO has already been linked to Tera Term and Tera Term has already been connected to the host, this command is ignored. As a result of this command, the system variable 'result' is set to one of the following values depending on the link and connection status: Value Status 0 Link to Tera Term has not been made.

I am using a Tera Term over a serial port to. Tera Term Scripting, need help developing a. I know Tera Term has a site that lists example macros as well as a. I have an electronics project that uses an FTDI chip as the serial. How to execute a command (macro) in Tera Term. There are example TTL files in the Tera Term.

1 Connection to the host has not been made, but link to Tera Term has been made. 2 Both connection and link have been made. To test the current link and connect status before executing the 'connect' command, use the ' command. Communication commands except 'connect', ' and ' can not be executed before the link is established.

Connection method There are 3 types of connection you can establish from Tera Term macro: • Telnet connection (port 23) • SSH1 or SSH2 connection (port 22) • Connection via COM port Telnet connections connect ' myserver:23 /nossh /T=1' connect ' myserver:23' Using /nossh is strongly recommended. Phototune 3 Crackheads. Without this parameter Tera Term will start connecting with the same method (telnet or SSH) that was used during last time when teraterm.ini file was saved.

In case it was SSH than your macro will try to connect via SSH and will eventually fail. Using /T=1 is recommended. Without this parameter Tera Term will start connecting with the value of 'Telnet' in teraterm.ini file. When the Telnet value is off, Tera Term may not work well. SSH connections connect ' myserver /ssh' This way will start SSH connection without defining whether SSH1 or SSH2 has to be used. Connect ' myserver /ssh /1' connect ' myserver /ssh /2' Parameters /1 and /2 force to use SSH1 or SSH2 method.